Model Number
PMWWTE
- Standards
- Meets or exceeds AASHTO Standards
- Machine Features
- Constructed of 93% stainless steel
- Built to minimize down time
- Automatic drain
- Automatic fill
- 4500W water heater
- Automatic circulation pump w/ filter
- 2 - 203mm diameter by 47mm wide wheels
- 158 lbs. wheel weight (Adjustable)
- Variable speed drive (1 Pass Per Minute increments)
- Adjustable water temperature from 15°C to 70°C (±0.3°C)
- Linear Value Displacement Transducer used for displacement measurement
- 0mm-30mm deformation range (±0.15mm)
- 11 measurements over equally spaced points per pass
- Up to 400,000 passes per test
- Automatic test shutdown after specifed deformation or maximum cycles complete
- Water level automatically maintained during the test
- Custom-designed, Windows-based software
- Optional Equipment
- Power conversion (360V/480V)
- Extra sample trays (60mm)
- Gyratory sample holders (60mm)
- Spare parts package
- 1 pre-wired float switch
- 1 thermalcouple
- 1 valve repair kit
- 1 pre-wired & calibrated LVDT
- 2 spare filters
- Wheel weight adjustment and verification kits
- LVDT calibration kit
- Rubber-covered stainless steel wheels
- Computer Control
- Microsoft Windows XP, Vista, 7 Compatible
- Control Software
- Realtime on-screen updates of test data
- Machine control
- Manual and Automatic Operation
- Ability to monitor any of the 11 data points in realtime
- Customizable test configuration
- Up to 400,000 total passes per test
- Temperature selection from 15°C to 75°C
- Speed (passes per minute) control
- 5 testing steps
- Customizable number of passes per step
- Customizable data collection frequency per step
- Fields for sample documentation
- Graph output software
- Deformation vs. Number of Passes
- Regression
- Temperature vs. Number of Passes
- Sample Profile
- Report Generator
- Rut Testing
- Export test data to Microsoft Excel
- Simple Data backup software
- Internet update capability
- Motion
- 1hp geared motor
- Crankshaft connecting rod assembly moves slider frame mounted wheels
- Slider frame mounted on four self-cleaning linear bearings
- Capable of speeds from 36 to 70 Passes Per Minute
- Speed controlled by frequency drive
- Physical Data
- Length: 60"
- Width: 29.5"
- Height: 64"
- Weight: 950 lbs.
- Power Requirements : 208/230V 50/60 Hz Single-Phase
- Safety
- Designed to keep operator at a safe distance from all moving parts
- Lock-out when the wheel is in the upright position
- Guard to protect around the linear bearings
If you have any questions about the Economy WheelTracker, please do not hesitate to contact me at the number or address on the contact page.
All products on this site are patented. Please help to keep them on this site.
All Rights Reserved. A product of PMW.
